Fix Overheating Fast Using the MortalTech CPU Monitor A overheating central processing unit (CPU) slows down your computer. It can cause sudden crashes and permanent hardware damage. The MortalTech CPU Monitor gives you the real-time data needed to fix this issue. Follow this guide to cool down your processor immediately. Step 1: Check Your Real-Time Temperatures
Open the MortalTech CPU Monitor to check your current core temperatures. Normal: 30°C to 50°C at idle. Warning: 70°C to 85°C under heavy loads. Danger: Above 90°C requires immediate action.
Identify which specific cores are running hot to isolate the issue. Step 2: Identify Resource-Hogging Programs High CPU usage drives up heat levels instantly. Click the Processes tab in the monitor. Sort the active programs by CPU Utilization. Locate apps consuming disproportionate processing power. Right-click and select End Task on unnecessary programs. Step 3: Optimize Fan Speed Profiles Fans must spin faster as hardware temperature climbs. Navigate to the Fan Control section. Switch from “Silent” to Performance or Max Speed. Create a custom fan curve for proactive cooling. Set fans to 100% capacity if temperatures cross 75°C. Step 4: Inspect Physical Hardware Software tweaks cannot fix hardware blockages or failures. Power down your computer completely. Open the case to check for dust buildup. Clear the heatsink using compressed air. Verify that all internal fans spin freely. Step 5: Refresh the Thermal Paste Old thermal paste dries out and stops transferring heat. Remove the CPU cooler carefully. Clean old paste with isopropyl alcohol. Apply a pea-sized drop of new paste. Reattach the cooler with even pressure.
Leave a Reply